Know the different applications of cassette seals

 

Hydraulic and pneumatic seals are fastening parts, which are exploited for applications with reciprocating or rotary motions. In applications, these seals perform different functions, meaning hydraulic seals will do the job of separating the fluids and pneumatic seals will separate gases. However, both seals do the job of the change of fluid power into linear motion.

You can find an extensive variety of hydraulic and pneumatic seals online according to your specific needs. They are available in terms of manufacturing, design, and application performance to meet the diverse needs of various industrial applications.

Whatever your industrial applications are, you will get the best industry-grade seals online that perform outstandingly in demanding environments. If you want to prevent the leakage of pressurized fluids between the piston and the cylinder, then you can use Piston Seals. As you can use these seals pneumatically and hydraulically, they perform a dual performance. This type of seal is available as single-acting seals and double-acting seals. You can use these seals with back-up rings and guide rings, as well.

For solving the seal extrusion problems, using Back-up Rings type of seals is the best option. This is because these seals are specially designed for that purpose and you can use them to boost the safety of the system pressure, as well.

Vee Packs type of hydraulic and pneumatic seals are designed with many vee rings, with the male as well as female adaptors. They will work well with single-acting cylinders as well as with double-acting cylinders.

If you would like to stop extrusion and spiraling, you can consider using T-seals. These seals are available in both rod styles, as well as in piston styles. You can use them to replace the existing O-rings, as well.

Some of the other different types of hydraulic and pneumatic seals available online for different applications include:

·         Wipers

·         O-rings

·         Rod Seals

·         U-cups

·         Guide Rings

The design purpose of cassette seals is to optimize to offer outstanding retention of either oil or grease as well as to provide the greatest protection against solid or liquid pollutants. The main job of these seals is to meet the demands of a specific application. They are extensively used as a front axle and rear axle in all wheel-end applications, including:

·         Tractors

·         Construction tools

·         Agricultural equipment

·         Off-highway trucks

·         Forestry tools

·         Design features

All cassette seals are designed with an incorporated wear sleeve as well as with the rubber inside diameter. However, some of these seals are configured with any one of a number of auxiliary lip or sealing lip. They are mostly made of an elastomeric material, known as Nitrile rubber, but there are seals that are made up of other compounds, such as:

·         Fluoro rubber

·         Polyacrylate

·         Hydrogenated Nitrile rubber

These materials are used to make these seals for meeting the specifications of diverse operating conditions.

Besides design, the sealing lip material of cassette seals can have an important impact on sealing reliability and performance. Therefore, most manufactures of these seals use a variety of materials to make the sealing lip to meet the requirements of dissimilar applications.